monitor: command "boot" aborted due to user interrupt
　　rommon 1 >
　　rommon 1 > ?
　　alias set and display aliases command
　　boot boot up an external process
　　break set/show/clear the breakpoint
　　confreg configuration register utility
　　cont continue executing a downloaded image
　　context display the context of a loaded image
　　cookie display contents of cookie PROM in hex
　　dev list the device table
　　dir list files in file system
　　dis disassemble instruction stream
　　dnld serial download a program module
　　frame print out a selected stack frame
　　help monitor builtin command help
　　history monitor command history
　　meminfo main memory information
　　repeat repeat a monitor command
　　reset system reset
　　set display the monitor variables
　　stack produce a stack trace
　　sync write monitor environment to NVRAM
　　sysret print out info from last system return
　　unalias unset an alias
　　unset unset a monitor variable
　　xmodem x/ymodem image download
　　rommon 2 > xmodem ?
　　Do not start the sending program yet...
　　File size Checksum File name
　　4096 bytes (0x1000) 0x0000 c3640-is-mz.122-8.T4.bin (deleted) (bad checksum: 0x9111)
　　14404760 bytes (0xdbcc98) 0x52d5 c3640-is-mz.122-8.T4.bin
　　
　　WARNING: All existing data in flash will be lost!
　　Invoke this application only for disaster recovery.
　　Do you wish to continue? y/n [n]: y
　　
　　Do you wish to continue? y/n [n]: y
　　Ready to receive file ? ...
　　Erasing flash at 0x30fc0000
　　program flash location 0x304c0000
　　Download Complete!
　　program load complete, entry point: 0x80008000, size: 0x4c274c
　　Self decompressing the image : ################################################################################################################################################################################################################################################################################################################################################################################################################# [OK]
　　
　　Restricted Rights Legend
　　
　　Use, duplication, or disclosure by the Government is
　　subject to restrictions as set forth in subparagraph
　　(c) of the Commercial Computer Software - Restricted
　　Rights clause at FAR sec. 52.227-19 and subparagraph
　　(c) (1) (ii) of the Rights in Technical Data and Computer
　　Software clause at DFARS sec. 252.227-7013.
　　
　　cisco Systems, Inc.
　　170 West Tasman Drive
　　San Jose, California 95134-1706
　　
　　
　　
　　Cisco Internetwork Operating System Software
　　IOS (tm) 3600 Software (C3640-I-M), Version 12.0(7)XK2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
　　TAC:Home:SW:IOS:Specials for info
　　Copyright (c) 1986-2000 by cisco Systems, Inc.
　　Compiled Tue 31-Oct-00 20:56 by kpma
　　Image text-base: 0x600088F0, data-base: 0x608C2000
　　
　　cisco 3640 (R4700) processor (revision 0x00) with 58368K/7168K bytes of memory.
　　Processor board ID 29401660
　　R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
　　Channelized E1, Version 1.0.
　　Bridging software.
　　X.25 software, Version 3.0.0.
　　Primary Rate ISDN software, Version 1.1.
　　2 FastEthernet/IEEE 802.3 interface(s)
　　2 Channelized E1/PRI port(s)
　　DRAM configuration is 64 bits wide with parity disabled.
　　125K bytes of non-volatile configuration memory.
　　16384K bytes of processor board System flash (Read/Write)
　　
　　ip pim bidir-enable
　　^
　　% Invalid input detected at ''^'' marker.
　　
　　
　　
　　Press RETURN to get started!
　　
　　
　　00:00:04: %PA-2-UNDEFPA: Undefined Port Adaptor type 101 in bay 2
　　Router>
　　00:00:08: %SYS-4-CONFIG_NEWER: Configuration from version 12.2 may not be correctly understood
　　00:00:08: %SYS-5-CONFIG_I: Configured from memory by console
　　00:0