一、CAT4006引擎模块WS-X4013的配置清单
（其中包括：基本设置、VLAN的配置、通道配置、以及端口镜像口的1/2设置连接千兆IDS）

Cisco Systems, Inc. Console

Enter password:
CAT4006> enable

Enter password:
CAT4006> (enable)
.......
..................
..................
....................
....................
..

begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
#time: Mon Apr 11 2005, 22:02:13
!
#version 6.1(1)
!
!
#system web interface version(s)
set password *********************
set enablepass *********************
!
#test
!
#system
set system name CAT4006
!
#frame distribution method
set port channel all distribution mac both
!
#vtp
set vtp domain hngazk
set vlan 1 name default type ethernet mtu 1500 said 100001 state active
set vlan 16 name Old_Bangong type ethernet mtu 1500 said 100016 state active
set vlan 17 name Server_Manage type ethernet mtu 1500 said 100017 state active
set vlan 18 name New_Bangong type ethernet mtu 1500 said 100018 state active
set vlan 19 name Library type ethernet mtu 1500 said 100019 state active
set vlan 20 name New_Shiyanzhongxin type ethernet mtu 1500 said 100020 state active
set vlan 22 name Old_Shiyanzhongxin type ethernet mtu 1500 said 100022 state active
set vlan 23 name CaiZhuan_Jiashuyuan type ethernet mtu 1500 said 100023 state active
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state active stp ieee
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active stp ibm
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state active mode srb aremaxhop 0 stemaxhop 0 backupcrf off
!
#ip
set interface sc0 17 21x.xxx.17.253/255.255.255.0 21x.xxx.xxx.255

set interface sl0 down
set interface me1 down
set ip route 0.0.0.0/0.0.0.0 21x.xxx.xxx.254
!
#dns
set ip dns server 21x.xxx.xxx.2 primary
set ip dns enable
!
#syslog
set logging level cops 2 default
!
#set boot command
set boot config-register 0x2
set boot system flash bootflash:cat4000.6-1-1.bin
!
#mls
set mls nde disable
!
#port channel
set port channel 3/1-4 636
!
#module 1 : 2-port 1000BaseX Supervisor
set udld enable 1/1
set trunk 1/1 nonegotiate dot1q 1-1005
set trunk 1/2 nonegotiate dot1q 1-1005
!
#module 2 : 6-port 1000BaseX Ethernet
set vlan 20 2/3
set port name 2/1 Old_Shiyanzhongxin
set port name 2/2 Library
set port name 2/3 New_Shiyanzhongxin
set port name 2/4 New_Bangong
set port name 2/5 CaiZhuan_Jiashuyuan
set port name 2/6 Old_Shiyanzhongxin
set udld enable 2/6
set udld disable 2/3
set trunk 2/1 nonegotiate dot1q 1-1005
set trunk 2/2 nonegotiate dot1q 1-1005
set trunk 2/3 nonegotiate dot1q 1-1005
set trunk 2/4 nonegotiate dot1q 1-1005
set trunk 2/5 nonegotiate dot1q 1-1005
set trunk 2/6 nonegotiate dot1q 1-1005
!
#module 3 : 34-port Router Switch Card
set vlan 16 3/3-9,3/11-19,3/26-34
set vlan 17 3/10,3/20
set vlan 18 3/21
set vlan 19 3/22
set vlan 20 3/23
set vlan 22 3/24
set vlan 23 3/25
set port name 3/1 Firewall_Talent
set trunk 3/1 nonegotiate dot1q 1-1005
set trunk 3/2 nonegotiate dot1q 1-1005
set port channel 3/1-2 mode on
!
#module 4 : 34-port 10/100/1000 Ethernet
set vlan 16 4/5-9,4/11,4/15-34
set vlan 17 4/3-4,4/10,4/12-14
set trunk 4/1 nonegotiate dot1q 1-1005
set trunk 4/2 nonegotiate dot1q 1-1005
!
#module 5 empty
!
#module 6 empty
!
#switch port analyzer
set span 2/1-6,3/1-34,4/1-34 1/2 both inpkts disable learning enable create
end
CAT4006> (enable)

转载地址：http://www.netsp.com.cn/Article/config/cisco/switch/200609/20060905161951.html