groupadd qscand
useradd –g qscand –s /bin/false qscand
tar zxvf qmail-scanner-1.20.tgz
cd qmail-scanner-1.20
./configure --qmail-queue-binary /var /qmail/bin/qmail-queue --admin postmaster \
--domain abc.com.cn --notify sender,admin --local-domains abc.com.cn --lang en_GB\
--debug yes --unzip yes --scanners clamscan
检查有无错误
然后安装./configure --qmail-queue-binary /var /qmail/bin/qmail-queue --admin postmaster \
--domain abc.com.cn --notify sender,admin --local-domains abc.com.cn --lang en_GB\
--debug yes --unzip yes --scanners clamscan --install
看看是否在/var/qmail/bin/qmail-scanner-queue.pl是否存在
chown qscand:qscand /var/qmail/bin/qmail-scanner-queue.pl
chmod 4755 /var/qmail/bin/qmail-scanner-queue.pl
然后用一个普通用户登陆，执行/var/qmail/bin/qmail-scanner-queue.pl -z
如果没有Can''t do setuid出现，恭喜你，如果有
回到安装文件目录，有个contrib目录，
make
make install
附加步骤：chown qscand:qscand /var/qmail/bin/qmail-scanner-queue
chmod 4755 /var/qmail/bin/qmail-scanner-queue
chmod 0755 /var/qmail/bin/qmail-scanner-queue.pl
然后用一个普通用户登陆，执行/var/qmail/bin/qmail-scanner-queue -z
/var/qmail/bin/qmail-scanner-queue –g
修改环境变量
1 在你的qmail启动脚本加入
QMAILQUEUE=/var/qmail/bin/qmail-scanner-queue.pl如果作了附加步骤用下面的
QMAILQUEUE=/var/qmail/bin/qmail-scanner-queue
export QMAILQUEUE
2还有一种方法：请参考FAQ.php
Instead set it under the tcpserver smtp rules file (you''re using Qmail - so you already know what that is - right? :-). That way you can even setup Qmail-Scanner to only scan mail from particular SMTP client IP address ranges/etc. This is now the only officially supported mechanism. Set it something like this:
#/etc/tcpserver/smtp.rules
#
# No Qmail-Scanner at all for mail from 127.0.0.1
127.:allow,RELAYCLIENT="",RBLSMTPD="",QMAILQUEUE="/var/qmail/bin/qmail-queue"
# Use Qmail-Scanner without SpamAssassin on any mail from the local network
# [it triggers SpamAssassin via the presence of the RELAYCLIENT var]
10.:allow,RELAYCLIENT="",RBLSMTPD="",QMAILQUEUE="/var/qmail/bin/qmail-scanner-queue.pl"
#
# Use Qmail-Scanner with SpamAssassin on any mail from the rest of the world
:allow,QMAILQUEUE="/var/qmail/bin/qmail-scanner-queue.pl"
Then run "maketcprules" or something like "tcprules /etc/tcp.smtp.cdb /etc/tcp.smtp.tmp < /etc/tcp.smtp" to rebuild the database
重起qmail 测试
这里有测试程序
/youdir/software/qmail-scanner-1.20 test_installation.sh
不知什么原因，我的clamscan 扫描不到病毒，
经过测试，发现了原因，正确解决方法：
修改qmail-scanner-queue.pl中的
my $clamscan_options="-r --disable-summary --max-recursion=10 --max-space=1000000";为
my $clamscan_options="-r --mbox --disable-summary --max-recursion=10 --max-space=1000000";
就可以ＯＫ了
（或者采用如下解决办法：
clamscan可以不动
修改qmail-scanner-queue.pl中的
my $clamscan_options="-r --disable-summary --max-recursion=10 --max-space=1000000";为
my $clamscan_options="-r --mbox --disable-summary --max-recursion=10 --max-space=1000000";
就可以ＯＫ了 ）
主要的排错监测日志
/var/spool/qmailscan/quarantine.log
/var/spool/qmailscan/qmail-queue.log
/var/log/clamd.log
/var/qmail/maillog （完）
文章转载地址：http://www.cnpaf.net/Class/Virus/05122020353971701151.htm
