网络通信 频道

骨干ISP配置实例之ISP1AC1的配置

  ISP1AC1
  **********************************************************************
  Device Characteristics
  Table 11 Hardware and Software Device Characteristics for ISP1AC1
  Host name ISP1AC1
  Chassis type Cisco 7206VXR
  Physical interfaces ?8 Ethernet/IEEE 802.3
  ?3 Fast Ethernet/IEEE 802.3
  Hardware components Cisco 7206VXR (NPE300) processor
  Software loaded Release 12.1(4.4)PI
  Memory Cisco 7206VXR (NPE300) processor (revision D): 40 MB
  IP addresses ?Loopback0: K.250.0.201 255.255.255.255
  ?FastEthernet3/0: K.250.1.2 255.255.255.248
  ?Ethernet5/2: K.250.1.33 255.255.255.248
  ?Ethernet5/3: K.250.1.41 255.255.255.248
  
  ***********************************************************************
  
  
  Configuration File
  version 12.1
  no service single-slot-reload-enable
  service timestamps debug datetime localtime show-timezone
  service timestamps log datetime localtime show-timezone
  no service password-encryption
  service udp-small-servers
  service tcp-small-servers
  !
  hostname ISP1AC1
  !
  logging buffered 1000000 debugging
  logging rate-limit console 10 except errors
  no logging console
  aaa new-model
  aaa authentication login default group tacacs+ enable
  aaa authentication login NOTACACS enable
  aaa accounting commands 15 default start-stop group tacacs+
  aaa accounting system default start-stop group tacacs+
  enable password lab
  !
  clock timezone PST -8
  clock summer-time PST recurring
  ip subnet-zero
  ip cef
  !
  !
  no ip finger
  no ip domain-lookup
  !
  ip multicast-routing
  call rsvp-sync
  !
  !
  !
  !
  !
  interface Loopback0
  ip address K.250.0.201 255.255.255.255
  ip pim sparse-mode
  !
  interface FastEthernet3/0
  description To ISP1DA1, FA0/1/0
  ip address K.250.1.2 255.255.255.248
  ip pim bsr-border
  ip pim sparse-mode
  ip multicast boundary 1
  duplex full
  !
  interface Ethernet5/2
  description TO ISP1AC1IPTV
  ip address K.250.1.33 255.255.255.248
  ip pim sparse-mode
  duplex half
  !
  interface Ethernet5/3
  description TO ISP1AC1CL1
  ip address K.250.1.41 255.255.255.248
  ip pim sparse-mode
  duplex half
  !
  ip classless
  ip route 0.0.0.0 0.0.0.0 K.250.1.1
  no ip http server
  ip pim rp-address K.250.0.201
  ip msdp peer J.1.0.203 connect-source FastEthernet3/0
  ip msdp sa-filter in J.1.0.203 list 124
  ip msdp sa-filter out J.1.0.203 list 124
  ip msdp cache-sa-state
  ip msdp redistribute list 124
  !
  access-list 1 deny 224.0.1.39
  access-list 1 deny 224.0.1.40
  access-list 1 deny 239.0.0.0 0.255.255.255
  access-list 1 permit any
  access-list 124 deny ip any host 224.0.2.2
  access-list 124 deny ip any host 224.0.1.3
  access-list 124 deny ip any host 224.0.1.24
  access-list 124 deny ip any host 224.0.1.22
  access-list 124 deny ip any host 224.0.1.2
  access-list 124 deny ip any host 224.0.1.35
  access-list 124 deny ip any host 224.0.1.60
  access-list 124 deny ip any host 224.0.1.39
  access-list 124 deny ip any host 224.0.1.40
  access-list 124 deny ip any 239.0.0.0 0.255.255.255
  access-list 124 deny ip 10.0.0.0 0.255.255.255 any
  access-list 124 deny ip 127.0.0.0 0.255.255.255 any
  access-list 124 deny ip 172.16.0.0 0.15.255.255 any
  access-list 124 deny ip K.168.0.0 0.0.255.255 any
  access-list 124 deny ip any 232.0.0.0 0.255.255.255
  access-list 124 permit ip any any
  snmp-server engineID local 00000009020000024ADFB800
  snmp-server community public RO
  snmp-server community STSS RW
  snmp-server packetsize 2048
  snmp-server contact sysadmin
  snmp-server chassis-id ISP1AC1
  !
  tacacs-server key cisco12345
  !
  alias exec int_desc show int | include Description
  alias exec cpu show proc cpu | include CPU
  alias exec mem show mem free | include Processor
  !
  line con 0
  exec-timeout 0 0
  login authentication NOTACACS
  transport input none
  line aux 0
  exec-timeout 0 0
  line vty 0 4
  exec-timeout 0 0
  password lab
  line vty 5 15
  !
  exception protocol ftp
  exception region-size 36864
  exception flash all disk0:
  ntp clock-period 17180280
  ntp update-calendar
  end
  

文章转载地址:http://cisco.chinaitlab.com/configure/7955.html

0
相关文章