Current configuration : 2496 bytes
| ! &nb sp; |
| version 12.2 |
| service timestamps debug uptime |
| service timestamps log uptime |
| no service password-encryption |
| ! |
| hostname Router |
| ! |
| aaa new-model |
| ! |
| ! |
| aaa group server radius pppoe |
| server 10.72.253.16 |
auth-port 1645 acct-port 164 |
6 |
| server 10.72.253.50 |
auth-port 1645 acct-port 164 |
6 |
| ! |
| aaa authentication p |
pp default group pppoe |
| aaa authorization network defaul |
t group pppoe |
| aaa accounting network default s |
tart-stop group pppoe |
| aaa session-id common |
| enable secret 5 $1$G |
JzG$hcJHvS/UMgYIf.GP3Xc/H1 |
| ! |
| username cisco password 0 cisco |
| ip subnet-zero |
| ! |
| ! |
| no ip domain-lookup |
| ip domain-name jxtvnet |
| ip name-server 10.72.255.131 |
| ! |
| ip audit notify log |
| ip audit po max-events 100 |
| ip ssh time-out 120 |
| ip ssh authentication-retries 3 |
| vpdn enable |
| ! |
| vpdn-group PPPOE |
| accept-dialin |
| protocol pppoe |
| virtual-template 10 |
| pppoe limit max-sessions 500 |
| ! |
| async-bootp dns-server 10.72.255 |
.131 10.72.255.132 |
| ! |
| crypto mib ipsec flo |
wmib history tunnel size 200 |
| crypto mib ipsec flo |
wmib history failure size 20 |
0 |
| interface Loopback0 |
| ip address 10.1.1.1 255.255.255.0 |
| ! |
| interface GigabitEthernet0/0 |
| no ip address |
| duplex full |
| speed 100 |
| media-type rj45 |
| pppoe enable |
| ! |
| interface GigabitEthernet0/0.1 |
| encapsulation dot1Q 1 native |
| ip address 172.19.4. |
254 255.255.255.248 |
| ! |
| interface GigabitEthernet0/0.2 |
| encapsulation dot1Q 2 |
| pppoe enable |
| ! |
| interface GigabitEthernet0/0.3 |
| encapsulation dot1Q 3 |
| pppoe enable |
| ! |
| interface GigabitEthernet0/0.4 |
| encapsulation dot1Q 4 |
| ip address 172.19.4.193 255.255. |
255.224 |
| ! |
| interface GigabitEthernet0/0.507 |
| encapsulation dot1Q 507 |
| pppoe enable |
| ! |
| interface GigabitEthernet0/0.699 |
| encapsulation dot1Q 699 |
| pppoe enable |
| ! |
| interface GigabitEthernet0/0.701 |
| encapsulation dot1Q 701 |
| pppoe enable |
| ! |
| interface GigabitEthernet0/1 |
| ip address 172.19.4.2 255.255.255.252 |
| duplex full |
| speed 100 |
| media-type rj45 |
| ! |
| interface Virtual-Template10 |
| mtu 1492 |
| ip unnumbered GigabitEthernet0/1 |
| no peer default ip address |
| ppp authentication chap |
| ! |
| ip classless |
| ip route 0.0.0.0 0.0.0.0 172.19.4.1 |
| no ip http server |
| ip pim bidir-enable |
| ! |
| ! |
| snmp-server community jxnc-tv-ro RO |
| snmp-server community jxnc-tv-rw RW |
| ! |
| ! |
| radius-server host 10.72.253.16 |
auth-port 1645 acct-port 1646 key cisco |
| radius-server host 1 |
0.72.253.50 auth-port 1645 a |
cct-port 1646 key cisco |
| radius-server retransmit 3 |
| call rsvp-sync |
| ! |
| ! |
| mgcp profile default |
| ! |
| dial-peer cor custom |
| ! |
| ! |
| ! |
| ! |
| ! |
| gatekeeper |
| shutdown |
| ! |
| ! |
| line con 0 |
| login authentication no_tacacs |
| line aux 0 |
| line vty 0 4 |
| password cisco |
| ! |
| ! |
| end |
| 说明一下： |
| 1、做了一个PPPOE RAD |
IUS SERVER组，目的是提高网络 |
的可靠性。 |
| 相关配置： |
| aaa new-model |
| ! |
| ! |
| aaa group server radius pppoe |
| server 10.72.253.16 auth-port 16 |
45 acct-port 1646 |
| server 10.72.253.50 |
auth-port 1645 acct-port 164 |
6 |
| ! |
| aaa authentication p |
pp default group pppoe |
| aaa authorization network defaul |
t group pppoe |
| aaa accounting netwo |
rk default start-stop group |
pppoe |
| aaa session-id common |
| radius-server host 10.72.253.16 |
auth-port 1645 acct-port 1646 key cisco |
| radius-server host 1 |
0.72.253.50 auth-port 1645 a |
cct-port 1646 key cisco |
| radius-server retransmit 3 |
转载地址：http://www.net130.com/CMS/Pub/Tech/tech_instance/18169.htm
